Industrial-grade lithium metal
The process of this project adopts the electrolysis process of anhydrous lithium chloride products in an anhydrous lithium chloride device. The electrolysis cell operates at a voltage of 220V, with the anode and cathode arranged alternately and a small distance between the electrodes. The cell voltage of a single electrolysis unit is low, significantly improving current efficiency, with a power consumption of less than 48,000 kWh per ton. Additionally, due to the electrolysis cell voltage being 220V, a large amount of copper transformers and wires is saved. The metallic lithium produced in this project is mainly used for lithium battery anode materials.
Product Standards
Classification:
| Grade | Li.≥ | Impurity content,≤ | |||||||||||
| K | Na | Ca | Fe | Si | Al | Ni | Cu | Mg | Cl- | N | Pb | ||
| Li-4 | 99.00 | - | 0.20 | 0.040 | 0.010 | 0.040 | 0.020 | - | 0.010 | - | - | - | 0.005 0 |
| Li-5 | 98.50 | One | 0.80 | 0.10 | 0.010 | 0.040 | - | - | - | - | - | - | 0.005 0 |
| Li-6 | 96.50 | 3.00 | 0.10 | 0.010 | 0.040 | - | - | - | - | - | - | 0.005 0 | |
| Note 1: The lithium content (mass fraction) is the remainder after subtracting the total measured impurities in the table. Note 2: If the buyer has special requirements for the chemical composition of lithium, it shall be agreed upon by both parties. |
|||||||||||||
Keywords: new energy, new materials, new medicine
Custom Products
COMMITTED
LITHIUM BATTERY NEW ENERGY MATERIALS FIELD
Service Hotline
Manager Hu
Minister Zheng
Mobile phone end
WeChat Public Number
powerde by:300.cn
